FORGED STAINLESS STEEL GLOBE VALVES CLASS 150-1500
FLANGED ENDS
KTN, Modentic
Range: DN15-50 – (1/2″-2″)
Pressure: CLASS 150-1500
Temperature: ASME B16.34
Integral flanged valves are available in bonnet designs. The design is the Bolted Bonnet, With male-female joint, spiral wound gasket, made in F304L/graphite. Ring joint gasket is also available on request. Integral flanged end valves are available in gate, globe, piston check design configuration.
Integral flanged end valves conform to API602, MSS-SP-118 (as applicable), and ANSI B16.34. BS 5352. Each are tested according to API 598, Marking is per MSS SP-25.
FEATURES
- Full Port or Conventional Port
- Face to Face according to ANSI B16.10
- Flanges according to ANSI B16.5
- Outside Screw and Yoke (OS&Y)
- Two piece self-aligning packing gland
- Integral backseat
- Integral flanges
- Bolted bonnet with spiral-wound gasket
Related: API602 Forged Steel Gate Valves
API602 FGTF-1500 – FULL PORT OR CONVENTIONAL PORT – OUTSIDE SCREW AND YOKE – TWO PIECES SELF ALIGNING PACKING GLAND – BOLTED BONNET WITH SPIRAL WOUND GASKET – INTEGRAL BACKSEAT – INTEGRAL FLANGES
| PRODUCT TYPE | Forged Stainless Steel Globe Valves |
| STANDARD COMPLIANCE | BS 1873, ASME/ANSI B16.34 Class 150, ASME/ANSI B16.10 Class 150 RF ASME/ANSI B16.10 Class 150 BW, ASME/ANSI B16.5 Class 150 Finish : 125-250 AARH, ASME/ANSI B16.25, API 598 |
| OPERATION | Hand wheel |
| PRESSURE | CLASS 150-600 |
| CONNECTION | Flanged End ANSI B16.5 / EN1092 VALVES LENGTH STANDARD ANSI B16.10 / DIN3202 F1 / F4 / F5 |
| PORT | Full Bore |
| BODY Material | ASTM A182 Gr.F316 |
| CAP / BONNET Material | ASTM A182 Gr.F316 |
| STEM Material | ASTM A182 Gr.F316 |
| DISC Material | ASTM A182 Gr.F316 |
| SEAT Material | – |
| BODY SEAL Material | SS316 + GRAPHITE |
| STEM PACKING Material | FLEXIBLE GRAPHITE |
| OPTION | Ring joint gasket Forged Carbon Steel Forged Stainless Steel |
| SIZE NPS | E mm | H mm | L mm | WEIGHT kgs |
| DN15 | 100.0 | 145.0 | 140.0 | – |
| DN20 | 100.0 | 150.0 | 152.0 | – |
| DN25 | 125.0 | 175.0 | 165.0 | – |
| DN32 | 160.0 | 200.0 | 178.0 | – |
| DN40 | 160.0 | 205.0 | 190.0 | – |
| DN50 | 180.0 | 230.0 | 216.0 | – |
| SIZE Inch | E Inch | H Inch | L Inch | WEIGHT lbs |
| 1/2″ | 3.9 | 5.7 | 5.5 | – |
| 3/4″ | 3.9 | 5.9 | 6.0 | – |
| 1″ | 4.9 | 6.9 | 6.5 | – |
| 1-1/4″ | 6.3 | 7.9 | 7.0 | – |
| 1-1/2″ | 6.3 | 8.1 | 7.5 | – |
| 2″ | 7.1 | 9.1 | 8.5 | – |