3 PC BALL VALVE BSP THREAD FULL BORE
FULL BORE.
MOUNTING FLANGE
KTN – FERGO
Range: 1/4 “- 2” – DN8/DN100
Pressure: PN63 – 1000 PSI
Temperature: -20ºC / 180ºC.
Our ball valve, made of stainless steel, which is available with different connections, is a real all-rounder. We offer it with socket weld or butt weld ends and with threaded ends (ISO or NPT). Because of its high pressure range of PN63, the PTFE-ball seats are reinforced with fiber glass, its stainless steel body and the standard ISO-top mounting flange for quarter-turn-actuators, the valve can be used for most applications universally. It is equipped with a lever; we also offer many other different actuator versions: pneumatic (single and double acting) or electric. Due to its three-part body construction, it is very easy to maintain. The different sizes, pressure stages and materials are shown on the datasheet, which can be downloaded on our website. For special executions please contact our sales department.
| Nominal width : | DN 8 -100 – 1/4” – 4” inch |
| Connection : | BSP Female thread |
| Design : | 2 ways |
| Material ball : | Stainless steel (1.4408) |
| Ball seal: | PTFE+15% glass fiber |
| Body: | Stainless Steel (1.4408) |
| Temperature range : | -25°C to +180°C |
| Actuation : | Hand Lever |
| Max. Operating pressure : | 63 bar |
| O-Ring: | Viton |
| Option: | Full passage |
| MATERIAL LIST | ||
| NO | PART NAME | SPECIFICATION |
| 1 | Body | A351-CF8M |
| 2 | Cap | A351-CF8M |
| 3 | Ball | A351-CF8m |
| 4 | Ball Seat | PTFE |
| 5 | Stem | A276 – 316 |
| 6 | Body Gasket | PTFE |
| 7 | Bolt | SUS 304 |
| 8 | Thrust Washer | PTFE |
| 9 | Lock Device | SUS 304 |
| 10 | Handle | SUS 304 |
| 11 | Handle Sleeve | Vinyl Plastic |
| 12 | Stem Nut | SUS 304 |
| 13 | Stem Washer | SUS 304 |
| 14 | Gland Nut | SUS 304 |
| 15 | Stem Packing | PTFE |
| 16 | Bolt Washer | SUS 304 |