TWO PC. BALL VALVE BSP THREAD WITH MOUNTING
Range: 1/4 “- 2” – DN8/DN50
KTN – FERGO
Pressure: PN63 – 1000 PSI
Temperature: -20ºC / 180ºC.
The ball valves mainly differ in connection form, body material, maximum pressure approval and the available certificates (TA Luft, FireSafe, DVGW Gas, DVGW Trinkwasser). You can choose between flange-connection (DIN or ANSI), threaded ends (DIN or ANSI and female or male thread) and socket weld or butt weld ends. The available standard body materials are brass, steel and stainless steel. Special materials like e.g. titan and duplex are also available on request. Ball valves with ISO-top mounting flange (ISO 5211) can be automated with pneumatic or electric actuators. The different sizes, pressure stages and materials are shown on the datasheet, which can be downloaded on our website. For special executions please contact our sales department.
Range: 1/4 “- 2” – DN8/DN50
Thread according to ISO 7-1 (EN 10226-1), F-F
Full bore – 2-piece
Blow-out proof shaft
Body: SS316 (1.4408)
Ball / shaft: SS316 (1.4408)
Seal ball: PTFE + 15% glass fibre
Temp. (min./max.): -25°C to +180°C
Max. Operating pressure: 63bar
Direct drive design according to ISO 5211
Locking device
| FEATURES | Investment Casting for Body and End Cap Blow-Out Proof Stem Various Thread Standards Available Full Port |
| STANDARDS | |
| Design: | ASME B16.34, API 608 |
| Pipe Thread: | ASME B1.20.1, BS21 DIN 2999/259, BSP |
| Inspection Testing: | API 598 |
| SPECIFICATIONS | |
| Working Pressure: | 1000 psi at 100ºF(38ºC) |
| Temperature Range: | -50ºF to 350ºF (-46ºC to 177ºC) |